Skip to content

Solid Carbide Reamers - Left Spiral Flutes - For Non-Ferrous - Made to Size

CuttingToolDepot > Shop > Super Tool Inc > Solid Carbide > Reamers > 9823

A reamer is used to finish machine a previously formed hole to an exact diameter with a smooth finish. It should not be used to significantly enlarge a hole (max. 5% depending on material and hardness). Carbide reamers are especially appropriate for close tolerance reaming. Because carbide is very highly resistant to wear, the reamer will produce accurate hole size and a smooth finish far longer than high speed steel or cobalt. The reamer is an end cutting tool, cutting only on the chamfer’s edge at the outside diameter of the preformed hole. The standard 45° chamfer angle provides effective cutting action for most materials.

Flute LengthMax Shank DiameterNumber Of FlutesOverall LengthTool Diameter RangeEDPPriceOrder
40.438640.4411 - 0.4720982330
40.4693640.4721 - 0.5150982332
1 1/80.281763 1/40.2841 - 0.3150982320
1 1/40.31363 1/20.3151 - 0.3470982322
1 1/40.344363 1/20.3471 - 0.3780982324
1 3/80.375563 3/40.3781 - 0.4090982326
1 3/80.406763 3/40.4091 - 0.4410982328
7/80.156742 3/40.1591 - 0.1750982311
7/80.172442 3/40.1751 - 0.1910982312
10.188630.1911 - 0.2210982314
10.2193630.2211 - 0.2530982316
1 1/80.250563 1/40.2531 - 0.2840982318
5/80.094342 1/40.0971 - 0.1120982307
5/80.109942 1/40.1121 - 0.1280982308
3/40.125542 1/20.1281 - 0.1435982309
3/40.141142 1/20.1436 - 0.1590982310

Can't find the Solid Carbide Reamers you need?

If you cannot find the exact Reamers you need to order online, we can build it for you. Just fill in a custom cutting tool form and fax it back to us at 941-465-4089. We will let you know how we can supply the Reamers you need.

Thank you for buying your Solid Carbide at CuttingToolDepot.