Skip to content

Solid Carbide Reamers - Straight Shank - Straight Flute - Made to Size - For Non-Ferrous

CuttingToolDepot > Shop > Super Tool Inc > Solid Carbide > Reamers > 9803

A reamer is used to finish machine a previously formed hole to an exact diameter with a smooth finish. It should not be used to significantly enlarge a hole (max. 5% depending on material and hardness). Carbide reamers are especially appropriate for close tolerance reaming. Because carbide is very highly resistant to wear, the reamer will produce accurate hole size and a smooth finish far longer than high speed steel or cobalt. The reamer is an end cutting tool, cutting only on the chamfer’s edge at the outside diameter of the preformed hole. The standard 45° chamfer angle provides effective cutting action for most materials.

Flute LengthMax Shank DiameterNumber Of FlutesOverall LengthTool Diameter RangeEDPPriceOrder
1 1/20.4693640.4721 - 0.5150980332 Add
1 3/80.406763 3/40.4091 - 0.4410980328 Add
1 1/20.438640.4411 - 0.4720980330 Add
1 1/40.344363 1/20.3471 - 0.3780980324 Add
1 3/80.375563 3/40.3781 - 0.4090980326 Add
1 1/80.281763 1/40.2841 - 0.3150980320 Add
1 1/40.31363 1/20.3151 - 0.3470980322 Add
10.2193630.2211 - 0.2530980316 Add
1 1/80.250563 1/40.2531 - 0.2840980318 Add
7/80.172442 3/40.1751 - 0.1910980312 Add
10.188630.1911 - 0.2210980314 Add
3/40.141142 1/20.1436 - 0.1590980310 Add
7/80.156742 3/40.1591 - 0.1750980311 Add
5/80.109942 1/40.1121 - 0.1280980308 Add
3/40.125542 1/20.1281 - 0.1435980309 Add
5/80.094342 1/40.0971 - 0.1120980307 Add

Can't find the Solid Carbide Reamers you need?

If you cannot find the exact Reamers you need to order online, we can build it for you. Just fill in a custom cutting tool form and fax it back to us at 941-465-4089. We will let you know how we can supply the Reamers you need.

Thank you for buying your Solid Carbide at CuttingToolDepot.