Skip to content

Expansion Reamers - Taper Shank - Full Flute Length Carbide

A reamer is used to finish machine a previously formed hole to an exact diameter with a smooth finish. It should not be used to significantly enlarge a hole (max. 5% depending on material and hardness). Carbide tipped reamers are especially appropriate for close tolerance reaming. Because carbide is very highly resistant to wear, the reamer will produce accurate hole size and a smooth finish far longer than high speed steel or cobalt. The reamer is an end cutting tool, cutting only on the chamfer’s edge at the outside diameter of the preformed hole. The standard 45° chamfer angle provides effective cutting action for most materials.

Decimal DiameterFractional DiameterCarbide LengthFlute LengthMorse TaperNumber Of FlutesOverall LengthEDPPriceOrder
2.37502 3/8335121556097 $793.75
2.50002 1/2335121556098 $793.75
2.12502 1/82 3/42 3/451214 1/256095 $714.30
2.25002 1/42 3/42 3/451214 1/256096 $767.05
1.93751 15/162 1/22 1/24101456091 $477.15
2.000022 1/22 1/24121456092 $477.15
1.81251 13/162 3/82 3/841013 1/256089 $436.55
1.87501 7/82 1/22 1/24101456090 $436.55
1.68751 11/162 1/42 1/4481356087 $368.70
1.75001 3/42 3/82 3/841013 1/256088 $368.70
1.56251 9/162 1/82 1/84812 1/256085 $332.90
1.62501 5/82 1/42 1/4481356086 $332.90
1.43751 7/1622481256080 $234.00
1.50001 1/22 1/82 1/84812 1/256081 $242.30
1.31251 5/161 7/81 7/84811 1/256078 $190.30
1.37501 3/822481256079 $208.50
1.18751 3/161 3/41 3/4381156076 $171.75
1.25001 1/41 7/81 7/84811 1/256077 $174.10
1.09381 3/321 3/41 3/4381156099 $152.65
1.12501 1/81 3/41 3/4381156075 $152.65
1.03131 1/321 5/81 5/83810 1/256072 $152.65
1.06251 1/161 5/81 5/83810 1/256073 $152.65
0.937515/161 1/21 1/2381056069 $134.70
1.000011 5/81 5/83810 1/256071 $139.60
0.87507/81 1/21 1/2261056067 $127.45
0.906329/321 1/21 1/2261056068 $134.70
0.812513/161 3/81 3/8269 1/256065 $117.75
0.843827/321 3/81 3/8269 1/256066 $122.75
0.75003/41 3/81 3/8269 1/256063 $109.60
0.781325/321 3/81 3/8269 1/256064 $117.75
0.687511/161 1/41 1/426956061 $109.40
0.718823/321 1/41 1/426956062 $109.60
0.62505/81 1/41 1/426956059 $97.15
0.656321/321 1/41 1/426956060 $109.40
0.56259/161 1/81 1/816856057 $93.40
0.593819/321 1/81 1/816856058 $97.15
0.50001/21116856055 $90.65
0.531317/321116856056 $93.40
0.43757/161114756054 $86.45
0.468815/321114756084 $90.65
0.37503/81114756053 $83.85
0.406313/321114756094 $86.45
0.31255/161114656050 $89.40
0.343811/321114656051 $89.40

Can't find the Carbide Tipped Reamers you need?

If you cannot find the exact Reamers you need to order online, we can build it for you. Just fill in a custom cutting tool form and fax it back to us at 941-465-4089. We will let you know how we can supply the Reamers you need.

Thank you for buying your Carbide Tipped at CuttingToolDepot.