Skip to content

4 Flutes Ball Nose 30° Right Hand Spiral Uncoated Carbide End Mills

CuttingToolDepot > Shop > IMCO Carbide Tool > End Mill > M/G End Mill > E14BMG

For general machining in a wide range of materials. Ball nose design. The E14 offers the most cutting edges in a general-purpose tool design. Best for roughing and finishing in a broad range of machining environments.
in: d1: +0.000 / -0.002 d2: -0.0001 / -0.0004
mm: d1: +0.000 / -0.050 d2: -0.0025 / -0.0100

Decimal DiameterFractional DiameterFlute LengthNumber Of FlutesOverall LengthShank DiameterShank TypeTool Type Size NoEDPPriceOrder
0.75003/4 in1-1/2 in44 in3/4 inPlainBall End0332377 $141.74
0.37503/8 in1 in42-1/2 in3/8 inPlainBall End0332368 $32.26
0.62505/8 in1-1/4 in43-1/2 in5/8 inPlainBall End0332374 $96.56
0.03121/32 in3/32 in41-1/2 in1/8 inPlainBall End0332342 $14.55
0.25001/4 in3/4 in42-1/2 in1/4 inPlainBall End0332363 $19.99
0.12501/8 in1/2 in41-1/2 in1/8 inPlainBall End0332354 $11.78
0.18753/16 in5/8 in42 in3/16 inPlainBall End0332359 $15.49
0.09383/32 in3/8 in41-1/2 in1/8 inPlainBall End0332350 $12.54
0.06251/16 in3/16 in41-1/2 in1/8 inPlainBall End0332346 $13.15
0.50001/2 in1 in43 in1/2 inPlainBall End0332371 $56.82

Can't find the End Mill M/G End Mill you need?

If you cannot find the exact M/G End Mill you need to order online, we can build it for you. Just fill in a custom cutting tool form and fax it back to us at 941-465-4089. We will let you know how we can supply the M/G End Mill you need.

Thank you for buying your End Mill at CuttingToolDepot.